Manufactered by : CRC Industries Europe NV Touwslagerstraat 1 – 9240 Zele – Belgium Tel  (32) (0) 52/45.60.11  Fax  (32) (0) 52/45.00.34 Technical Data Sheet KONTAKT CHEMIE Kontakt Gold 2000 Page 1/2 Synthetic lubricant for electrical contacts KONTAKT CHEMIE Kontakt Gold 2000 Description: Synthetic polyphenyl ether, long-life and temperature-resistant lubricant General properties and applications: KONTAKT CHEMIE Kontakt Gold 2000 is a long-lasting and temperature-resistant lubricant. The  synthetic  oil  forms  extremely  thin  layers  with  minimum  influence  on  the  contact resistance  of  electrical  contacts.  The  lubricant  has  proved  to  be  particularly  effective  for contacts  with  surface  coatings  of  soft  metals,  e.g.  gold,  silver,  tin.  The  corrosion-inhibiting effect   of   noble-metal   coatings   is   improved   considerably   because   they   are   no   longer scratched by mechanical loads and vibrations. Technical data Properties in condition as-supplied Density Aerosol Bulk FEA 605 ASTM D 891 0,77 g/cm³ 0,758 g/cm³ Flash point Aerosol Bulk ASTM D 56 < 0°C < 0°C Properties of the active product Flash point ASTM D 56 Ca. 280°C Density DIN D 891 1,20 cm³ Viscosity at     27°C 38°C 99°C 204°C ASTM 2989 1000 mm²/s 363 mm²/s 13,1 mm²/s 2,1 mm²/s Pour point ASTM D 97 5°C Vapour pressure 0,01 mbar Prolonged temperature resistance Up to 200°c
Manufactered by : CRC Industries Europe NV Touwslagerstraat 1 – 9240 Zele – Belgium Tel  (32) (0) 52/45.60.11  Fax  (32) (0) 52/45.00.34 KONTAKT CHEMIE Kontakt Gold 2000 Page 2/2 Application instructions: KONTAKT CHEMIE Kontakt Gold 2000 is sprayed thinly on to the contact surface. The bulk product can also be applied with a soft brush, cotton swab or a suitable dispensing unit. Dirty or corroded contacts must be cleaned before being treated. The products Kontakt 60 and Kontakt WL from KONTAKT CHEMIE are suitable for this purpose. Further information can be obtained from the relevant technical specifications. KONTAKT CHEMIE Kontakt Gold 2000 contains flammable solvents. Tools and equipment must  be  suitable  for  use  with  flammable  liquids.  The  product  must  not  be  sprayed  into energised electrical equipment. Before the equipment is started up again, the solvent must be  evaporated  completely.  Further  information  on  safety  can  be  obtained  from  the  safety datasheet. Available : aerosol :   200 ml bulk :    1 l These values are not intended to be used as specifications.  They are based on what we believe reliable.  However it is the user’s responsibility to determine the suitability.